Prices are tax included
LiitoKala Engineer Lii-500 Intelligent 18650 26650 16340 UK Vape Battery Charger
Warning: Last items in stock!
By buying this product you can collect up to 2 loyalty points. Your cart will total 2 loyalty points that can be converted into a voucher of £ 0.40.
|No. of Slots||4|
|Input Power Type||Mains|
|Revive Dead Cells||Yes|
|Capacity Test Function||Yes|
Latest 2017 Model
Lii-500 is based on Lii-300 R & D products, its biggest feature is displayed on-screen information, it will all work information and a full battery information is displayed on the screen, no need to press the View button to view more . In addition, based on Lii-300, Lii-500 combined with the high temperature protection, so Lii-500 safer.
The Lii 500, which is a high-end and smart charger with four independent charging bays.
Battery capacity detection
Battery internal resistance detection
Reverse polarity detection
Short circuit protection
Temperature control protection
Charging between 1.65V-2.2V
USB 5V output
Automatic battery monitoring while battery is charging and being tested
Lii-500 can be filled with a variety of different types of rechargeable cylindrical lithium-ion batteries and AA/AAA cylindrical NI-MH battery, which are widely used in charging the battery for flashlights, power tools, instruments and apparatuses, digital camera and other electronic products.
Safe, portable and powerful
USB 5V OUTPUT
1. The USB is only as the 5V mobile output, the output current is 1000mah, when it connect to the power supply, the USB output is invalid.
2. When the battery is placed into the tank of the charger, the USB 5V output is activated, so that it can charge the 5V electronic products.
3. There are for battery slots, any one can be the USB output, however, It is better to put the batteries into two slots.
4. 5V USB output is only valid for the 3.7V lithium battery, invalid for the NI-MH to boost.
DC input voltage:12V/2.0A
Lithium battery charging current:300mah/500mah/700mah/1000mah(4.2V)
NI-MH charging current:300mah/500mah/700mah/1000mah(1.48V)
Rechargeable battery specifications: 18650/26650/14500/AA/AAA
USB output: 5V---1000mah
Termination mode: Intelligent voltage monitoring
Dimensions: 162mm x 96mm x 36)mm
1x LiitoKala Engineer 500 Quad Bay Battery Charger
1x LiiitoKala UK 3Pin 2a Mains Power Module
Warning for using the lithium ion rechargeable batterries.
Mishandling of the battery may cause heat, fire and deterioration in performance.
Be sure to observe the following.
Cautions for Use and Handling
-When using the application equipped with the battery, refer to the user’s manual before usage.
-Please read the specific charger manual before charging.
-Charge time should not be longer than specified in the manual.
-When the cell is not charged after long exposure to the charger, discontinue charging.
-Battery must be charged at operating temperature range -5 ~ 50c.
-Battery must be discharged at operating temperature range -20 ~ 75c. (Cell Surface Temperature)
-Please check the positive (+) and negative (-) direction before packing.
-When a lead plate or wire is connected to the cell for packing, check out insulation not to short-circuit.
-Battery must be stored separately when not in use.
-Battery must be stored in a dry area with low temperature for long-term storage.
-Do not place the battery in direct sunlight or heat.
-Do not use the battery in high static energy environment where the protection device can be damaged.
-When rust or smell is detected on first use, please return the product to the seller immediately.
-The battery must be kept away from children or pets
-When cell life span shortens after long usage, please exchange to new cells.
-If wrapper is damaged dispose of immediately
-Do not use different charger. Do not use cigarette jacks (in cars) for charging.
-Do not charge with constant current more than maximum charge current.
-Do not discharge at cell temperature of over the 75c
-Do not disassemble or reconstruct the battery.
-Do not throw or cause impact.
-Do not pierce a hole in the battery with sharp objects. (such as nail, knife, pencil, drill)
-Do not use with other batteries or cells.
-Do not solder on battery directly.
-Do not press the battery with overload in manufacturing process, especially ultrasonic welding.
-Do not use old and new cells together for packing.
-Do not expose the battery to high heat. (such as fire)
-Do not put the battery into a microwave or high pressure container.
-Do not use the battery reversed.
-Do not connect positive(+) and negative(-) with conductive materials (such as metal, wire)
-Do not allow the battery to be in contact with water or sea-water.
-Do not use in applications which exceed battery capabilities
-Do not use outside of battery packs
-Items for sale to battery pack makers and system integrators only